Accessories

Adapter plate for fan mounting

In many cellars there are already core drillings, unfortunately not always with the required decisions for the fans. Often the same core holes are too small. To remedy this, we can provide you with so-called adapter plates for installing fans. The adapter plate is available for the fans type 100-150 and 100-230, these are mounted centrally on the display core drilling.

The adapter plates are made of a 21mm waterproof material. The plate already has 8 holes (see photo). Mount the fan on the inner holes. For this purpose, the fan has 4 mm holes in each corner of its mounting plate (gray). The fan is now mounted on the plate using 4 screws The plate is delivered ready for assembly with screws.

The adapter plate already has 8 holes. Mount the fan on the inner holes. After the fan has been successfully installed on the adapter plate, the fan is now mounted centrally on the existing hole using 4 screws with dowels on the wall.

Insect protection for fans

All fans are now also available with insect protection!

Are you concerned that spiders, flies or other insects could get into the basement through the fans? We understand! It is precisely for this reason that we offer you the insect screen for fans as an accessory made to measure.

The insect screen for fans is already fixed by us with double-sided adhesive tape in the external fan flap.

100-149 Screw set

The screw set includes four threaded rods and a screw set for mounting the fans. The screw set type 100-149 is required to overcome the wall thickness for core drilling. The maximum wall thickness may be 45 cm. With this screw set, the inner part of the fan (motor unit) is screwed together with the outer part of the fan (cover). One screw set is required for each fan.

​